When we handle commercial pressure washing for stone & stone veneer in Boulder, CO, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. For stone & stone veneer, that means low-pressure wash.
Method and pressure
Cleaning solution: A pH-appropriate stone cleaner or soft wash, tested on a small area first.
Caring for stone & stone veneer
Natural stone and manufactured stone veneer vary a lot. Manufactured veneer is cast concrete with a colored surface that high pressure can wear off, and limestone and sandstone are softer than granite.
Avoid: High pressure on manufactured veneer, and acidic cleaners on limestone, marble and other calcium-based stone.
How often: Every 2-3 years.
Signs you need commercial pressure washing for stone & stone veneer
- Dirty entrances and walkways
- Stained building walls and signs
- Gum, grease and spills around doors
- Customer or tenant complaints
- Health or property manager inspections coming up
What causes the dirt and stains
- Heavy foot traffic
- Vehicle traffic and drips
- Food and grease near restaurants
- Pollution and weather
Safe steps for homeowners
- Sweep entrances daily
- Clean up spills right away
- Keep dumpster areas closed and clean
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
What can go wrong with DIY pressure washing
- Wash water reaching storm drains, which can violate local stormwater rules
- Slips and liability during business hours
- Damaging signs, windows and finishes
What happens on the day
- Survey the property and plan around your hours
- Set up signs and control wash water
- Pre-treat stains, gum and grease
- Clean walls and flatwork with the right pressure
- Final walkthrough and maintenance schedule
Typical commercial pressure washing for stone & stone veneer prices
What moves the price:
- Area and number of buildings
- Scheduling: early-morning, overnight or weekend work
- Whether wash water has to be recovered under local stormwater rules
- Frequency: recurring service is usually priced lower per visit
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for stone & stone veneer
- Soft Washing for Stone & Stone Veneer
- House Washing for Stone & Stone Veneer
- Graffiti Removal for Stone & Stone Veneer
- Efflorescence Removal for Stone & Stone Veneer
Commercial Pressure Washing for Stone & Stone Veneer in Boulder, CO
Commercial properties in Colorado usually schedule a spring clean-up of sand, salt and litter, and summer cleaning of entrances, patios and drive-thrus.
Some cities in Colorado limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.
Besides Boulder (ZIP codes 80301, 80302, 80303, 80304, 80305 and more), we handle commercial pressure washing for stone & stone veneer in Gunbarrel (6.2 mi), Superior (6.9 mi), Louisville (7.8 mi) and Niwot (8.1 mi). Call (555) 010-0000 for a free quote in Boulder.
Commercial Pressure Washing for Stone & Stone Veneer: frequently asked questions
How much does commercial pressure washing for stone & stone veneer cost in Boulder, CO?
Commercial Pressure Washing for Stone & Stone Veneer typically costs $400-$2,000 for a typical small to mid-size commercial building, and usually takes Half a day to several days. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for commercial pressure washing for stone & stone veneer?
For stone & stone veneer: soft wash for veneer; up to about 1,500 PSI on solid natural stone, depending on the stone. What we avoid: high pressure on manufactured veneer, and acidic cleaners on limestone, marble and other calcium-based stone. The cleaning solution does most of the work, followed by a gentle rinse.
Is commercial pressure washing for stone & stone veneer safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule commercial pressure washing for stone & stone veneer?
Every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.